Description
Chemmate Rust Remover is an industrial-strength phosphoric acid formula for removing rust, tarnish and insoluble deposits from mild steel, galvanised steel, stainless steel, aluminium and copper. It also provides corrosion inhibition after treatment.
- Removes rust, tarnish and scale from steel, aluminium and copper
- Works on mild steel, galvanised, stainless steel and more
- Provides corrosion protection after use
- Suitable for trade, industrial and commercial use
- Available in 5L and 20L
Directions:
Dilute in the ratio of 1 part ‘Rust Remover’ with up to 5 parts of water depending on the degree of contamination. Brush onto the surface and allow it to react. Rust removal may be assisted with a wire brush, steel wool or abrasive cloth. On completion rinse with water and wipe dry.
Immersion:
Dilute with water in the ratio of 1 part of “Rust Remover'' to 9 parts water. Soak the article for ten minutes, remove and check for reaction, repeat the process until desired, effect is achieved. Non water rinsing: Where water rinsing after “Rust Terminator” treatment is not available or possible, methylated spirits may be used.