Description
For long term, residual insect control with Insect Growth Regulator (IGR). Ideal for commercial, industrial, and rural pest management.
Benefits
- An emulsion concentrate formulation intended to be applied diluted, as a residual surface spray that also contains an Insect Growth Regulator (IGR).
- Developed and tested for commercial and professional use in New Zealand conditions.
- Proudly New Zealand made.
About This Product
Active Ingredients
- 100g / L Permethrin.
- 3g / L Pyriproxyfen.
Available Sizes
- 5L (SKU: C14005)
Regulations
HSNO Approval Code: HSR101143
Directions & Product Label
- Clean down dusty or greasy surfaces before application.
- Allow to dry before application.
- Follow dilution rates depending on the target surface:
- Non–porous surfaces: Dilute with up to 5L of water per 100m², do not exceed the point of run–off.
- Porous surfaces: Dilute with up to 10L of water per 100m² of surface, do not exceed the point of run–off.
- A range of different types of application equipment may be used to apply it. Calibrate equipment to deliver the target rates indicated below:
| Pest | Rate |
|---|---|
| General | 30 – 80 mL / 100m² Use the higher rate when pest pressure is high or conditions warrant it. |
| Ants, Carpet Beetles, Clothes Moth, Mosquitoes and Flies, Silverfish, Spiders, Stored Product Insects and General Crawling Insects | 30 – 80 mL / 100m² |
| Bed Bugs and Cockroaches | 80 mL / 100m² |
| Fleas | 50 – 80 mL / 100m² |
Caution & SDS Sheet
- Read instructions thoroughly before use.
- Please follow cautionary labels and safety instructions located on the product packaging / label.
Download product label | Permethrin + IGR SDS
Helpful Tips
- Read instructions thoroughly before use and retain instructions label for future reference.
- If misting application equipment is used, users should be aware of the greater potential for off–target drift with use of finer droplets. Protect non–target surfaces from spray drift.
- Pressure spray equipment – for most pressure spray equipment the dilution rate will be 10 – 30 mL / L.
- This product is not to be used in a wide dispersive manner (where there would be potential for losses by airborne drift or run–off).